Hammock Chair Hanging Kit on Sale

HIGHLIGHTS

• Works with tree branches, beams or posts
• All-inclusive kit (Eyebolt is 4in long with 2in of thread – J hook is 3in long – Chain is 15in long)
• Zinc-coated hardware
• Only minutes to install
• Works with all style hammock chairs

DESCRIPTION

Don t waste your time and effort with homemade hammock-hanging methods. With this Hammock Chair Hanging Kit, you ll have all the appropriate hardware in place and ready to use. In just a few minutes you ll be able to enjoy your hammock chair in a safe, secure manner.

The Hammock Chair Hanging Kit is a safe and easy way to hang your hammock chair from tree branches in your yard, from wooden gazebo posts, or even in your home ceiling joists. You won t have to worry about your product slipping because of old rusty nails that were never designed to withstand such a weight load.

The Hammock Chair Hanging Kit comes with all the items you ll need to support your hammock chair, meaning you don t have to make repeated trips to the hardware store or resort to a trial-and-error method. These materials have been effectively tried and tested over the years to provide the proper support. Each kit includes one eye bolt with a hook, one S-hook, and one piece of chain. Each item is zinc-coated to withstand the elements – those cold, wet winters and those hot, humid summers. And each is specifically assembled to make your hammock chair more secure. After deciding where the product should be placed, you will determine how high to place the hardware. The eye bolt is screwed into the tree branch or the support and then attached to the S-hook via the chain, which can be adjusted according to the desired height.

The Hammock Chair Hanging Kit will work properly with any chairs with a loop at the top. It takes only a few minutes to install, leaving you the rest of the day to start reminiscing on or making pleasant memories.

IMPORTANT SAFETY NOTICE
Make sure you are installing this kit in a solid structural joist. Screwing EyeBolt MUST be screwed in all the way until Eye is resting against the structural joist. Leaving a gap between the eyebolt and the structural joist will eventually cause the exposed eyebolt pin to break.

Determining the appropriate beam size for your hammock chair bolt-in anchors involves considering several factors, such as the material of the beam, the load capacity of the anchors, and the intended use of the hammock. Here are some general guidelines:

1. Material and Strength of the Beam:

   • If you re installing bolt-in anchors into a wooden beam, the beam should be a solid and structurally sound piece of wood.
   • For wooden beams, a common recommendation is to use a solid beam with a minimum size of 4×4 inches (approximately 10×10 cm) or larger, depending on the expected load and the specific recommendations of the bolt-in anchor manufacturer.
   • • Load Capacity of Bolt-In Anchors:

       • Check the load capacity specifications provided by the manufacturer of the bolt-in anchors. This information will guide you in selecting a beam size that can safely support the expected load.
       • • Intended Use:

           • Consider the number of people who will be using the hammock chair simultaneously and any dynamic forces that may be applied. Larger beams may be necessary for heavier loads or multiple users.
           • • Professional Advice:

               • If you have any doubts about the appropriate beam size or the structural integrity of the installation, it is advisable to consult with a structural engineer or a professional with experience in load-bearing structures.

               • • The safety and stability of your hammock setup depend on proper installation and adherence to recommended specifications. If in doubt, it s always best to seek professional advice to ensure the safety and stability of your hammock chair installation.

                   SPECS

                    

                   Product(s) Ship to		USA
                   What s Included		1 S-Hook, 1 Chain, 1 Eye-Bolt with Attached J-Hook (Eyebolts is 4in long with 2in of thread – J hook is 3in long – Chains are 15in long)
                   Warranty		1 Year
                   Brand		Hammock Universe®
                   Materials		Steel
                   Recommended Storage After Outdoor Use		Not required
                   Weight (lb) Weight Capacity (lbs)		1     250
                   Healthy Trunk Tree Size Requirement		Minimum Diameter of 6 inches (15 cm)
                   Minimum Wood Beam Size Requirement		4×4 inches (approximately 10×10 cm) or larger
                   Made in		China

                   Color	gray-zinc